APP CLASSIC ROOFING 100sq TORCH DOWN
APP Smooth is a premium, APP modified, polyester reinforced, modified bituminous roofing membrane designed for installation
by heat welding. APP Smooth is specially formulated using select asphalt and Atactic
polypropylene modifiers, and is reinforced with a tough, non-woven polyester mat that provides
exceptional strength and durability. The exposed side is surfaced with fine sand and the backside is
protected with polyolefinic film to facilitate ease of application via torching.
BRAND MAY VARY
E-Z BLACK ROLL ROOFING SELF STICK 100 sq ft
- Features and Benefits
- Time-tested "Dual Compound" based SBS peel and stick membrane.
- No specific tools required. Clean, easy to handle, peel and stick self-adhering application.
- No fumes during application, eliminating odors caused by adhesives and hot asphalt.
- 30-40% quicker installation than conventional application.
- Excellent granule adhesion.
- Polyester reinforcement offers superior tensile, tear and elongation properties and ensures exceptional dimensional stability.
- Well defined four inch peel and stick side lap.
- Peel and stick selvage results in instant, watertight lap bond (5X of competitor products).
- Adheres to a variety of substrates.
ROLL 90lb BLACK ROOFING 100 sq ft
Features and Benefits
- Versatile and easy to handle
- Durable and cost-effective
- Reinforced with glass fiber mat ensuring dimensional stability during installation
- Specially formulated asphalt gives lasting performance
- Rolls lay flat and resist wrinkling for easy application
- Low-slope residential and commercial use
- Granular surfacing available in multiple colors to complement most shingle applications
ROLL 90lb CEDAR ROOFING 100 sq ft
Features and Benefits
- Versatile and easy to handle
- Durable and cost-effective
- Reinforced with glass fiber mat ensuring dimensional stability during installation
- Specially formulated asphalt gives lasting performance
- Rolls lay flat and resist wrinkling for easy application
- Low-slope residential and commercial use
- Granular surfacing available in multiple colors to complement most shingle applications
ROLL 90lb WHITE ROOFING 100 sq ft
Features and Benefits
- Versatile and easy to handle
- Durable and cost-effective
- Reinforced with glass fiber mat ensuring dimensional stability during installation
- Specially formulated asphalt gives lasting performance
- Rolls lay flat and resist wrinkling for easy application
- Low-slope residential and commercial use
- Granular surfacing available in multiple colors to complement most shingle applications
ALUMINUM PEEL & SEAL ROLL ROOFING 100 sq ft
- Used Where Waterproofing Is Needed. Weatherproof. For Roofing, Patching, Gutter Repair, Flashing, And General Waterproofing Where The Membrane Will Be Exposed. A Laminate Of Reflective Aluminum Foil, Rugged, Cross-Linked Polymer Films, And A Thick Layer Of Rubberized Asphalt. Designed For Low-Slope Roof Applications. For Mobile Homes, Trailers, RVs, And Sunrooms. The Asphalt Compound Adheres To Most Surfaces And Seals Around Most Punctures, Forming A Protective Waterproof Barrier. Aluminum Surface Reflects Heat. Puncture And Abrasion Resistant. Stretches To Allow For Building Movement. Conforms To Odd Shapes. Requires No Coating Or Covering For Exposure To Sunlight. Tested To ASTM D 1970, Meets The Requirements Of ICC-ES AC-75, And Has A Class A Fire Rating When Installed On A Non-Combustible Deck. Coverage Sq. Ft. May Vary Depending On Amount Of Over Lap.
- SELF STICK ALUMINUM
- 36"Wide X 33-1/2' Long
- Mil : 45
10' x 25' RUBBER ROOFING 45mil
EPDM "Rubber Roofing" is designed and tested for weatherability, durability, and compatibility for flat or low-slope roof conditions.
Thickness: 45 millimeters
EPDM RUBBER ROOF PIPE BOOT 1" to 6"
Pre-fabricated GenTite Peel & Stick Pipe Boots are designed to cover round penetrations found on the roof. Fits 1" to 6" pipes and can withstand intermittent temperatures up to 180 F.
EPDM RUBBER ROOF PIPE POCKET 6"
Pre-fabricated GenTite Peel & Stick Penetration Pockets are designed to flash angular penetrations. May also be used where round penetrations are not accessible from the top. Includes a rigid polyethylene ring that is expandable up to 3"
10' x 25' RUBBER ROOFING 60mil
EPDM "Rubber Roofing" is designed and tested for weatherability, durability, and compatibility for flat or low-slope roof conditions.
Thickness: 60 millimeters
ECONOMY TORCH DOWN APP ROOFING
CLOSEOUT DEAL
This ECONOMY TORCH DOWN APP ROOFING has a granule surfaced, single reinforced APP modified bitumen waterproofing membrane. Covers 100 SQ with a thickness of 161 mil! A Closeout deal with a great product at a low price! Get it while supplies last.
All Sales are Final/No Returns!
FEATURES:
- High quality 4.1 mm (161 mils) granule surfaced UL fire-resistant
APP modified bitumen roofing membrane
- Exclusive blend of APP (atactic polypropylene)
polymers and select asphalts enhances the weathering capabilities and
UV resistance of the membrane
- Reinforced with a tough, dimensionally stable 220 gram polyester mat fortified
with continuous fiberglass runners
- Mineral surfacing provides added resistance to weathering and foot traffic
- Meets and exceeds requirements of ASTM D6222, Type I, Grade G
- Can be applied with PERMASTIC Cold Adhesive or heat welded
- Thickness: 161 mil.
- Length: 33.5 ft.
- Width: 39.4 in.
- Weight: 101 lb.
- Net Coverage: 100 sq. ft.